#sensors
5 discoveries · Hand-picked discoveries from the open web, newest first.
-
Ultrasound imaging without the gel
A new dry material could replace the traditional goopy gel for wearable ultrasound patches.
MIT News · EN
-
ESP32-C3 fishing line counter with a 3D-printed wheel
XiaoGai has posted a fishing line counter on Hackster.io, built from an ESP32-C3 SuperMini, a 0.96-inch SSD1306 OLED, an A3144E Hall module, a tactile button and a 3D-printed wheel. It doesn’t need a custom PCB or a pinch roller. The line wraps once around the wheel on the side of the case. Pulling the line […]
Adafruit Blog · EN
-
Smart Humidity Monitor & Alert System with Windows GUI
Mousavi posted a humidity monitor on Hackster.io that watches a room and says when it’s time to switch on a humidifier. The original plan was full automation: a DHT11 sensor and a 5V relay to power a cool mist humidifier when the air got dry. That didn’t work. The humidifier has its own logic controller […]
Adafruit Blog · EN
-
ESP32 Demoboard: New demo projects using on-board hardware
oeadmin continues the ESP32 demoboard series on Open Electronics with five more Arduino examples that use the board’s OLED display and its plug-in breakout modules. The first reads hand gestures from an APDS-9960 sensor, a part that detects light, color and motion from about 10 to 20 cm away, and prints the direction on the […]
Adafruit Blog · EN
-
6 ESP32 projects to build including an OLED pulse oximeter
Julian Horsey writing for Geeky Gadgets rounds up six ESP32 builds from Hacktuber, starting with a pulse oximeter. It pairs a pulse oximeter sensor with the ESP32 to read heart rate and blood oxygen saturation, then shows the numbers on a small OLED screen. The rest cover a good spread of what the chip can […]
Adafruit Blog · EN