#openwrt

Openwrt with AX88179B USB network adapters on a rpi 4b

Spoiler … it didn’t work, yet. So, my current network setup is:

index on acme@volatile · EN

OpenWrt on a Cudyr700, with two ISPs

After my previous failure of trying openwrt on a rpi4 I switched back to my cudy r700, there’s openwrt support for that device, so I went that route. After some research I found this and was able to have it running.

index on acme@volatile · EN

Forcing OpenWRT on a WD N600 router

According to the OpenWRT wiki, 1 there are three tested methods to install OpenWRT on a WD N600 router. However, when I got my hands on one, neither method worked. Every time I tried to flash the factory image (version 24.10.0 at the time), the router’s light would slowly turn on and off, as if the image was being flashed, but it would never stop. The router would get stuck and never reboot. After a couple hours of tears and frustration, I managed to figure out what the issue was. After giving the factory image a shorter name and following the wiki’s first method, the router would

Kagi Small Web · EN